Precision Machining – Equipment

• 1   Supermax TC-2 with Fanuc OTC Control with 12” swing and 8” Chuck/10 tools
• 1   Super Precision Hardinge Quest GT27 with Glass Scales and .000015” repeatability
• 1   YCM TC-36 Turning Center w/ Fanuc TXP100 Control and 15” Chuck w/23”dia. x 46” length turning area 0.00020” turning accuracy
• 1   YCM TC-26 Turning Center w/ Fanuc TXP100 Control and 10” Chuck w/19.69”dia. x 27.5” length turning area 0.00020” turning accuracy

• 2   Makino U6 Heat Wire EDM, size capability 25.6” x 17.7” x 16.5”

• 2   Fanuc Robo-Cut Model 1B Wire EDM machine 19” x 24” x 12” capacity

• 1   Herbert Walter RAM EDM, 24 tool, 12 pallet RAM cut 303 – size capability of 20.5” x 15.8” x 15.8”

• 1   Moore 1½ Jig Borer

• 1   Moore 1½ Jig Borer with 0.00005” readout

• 1   Bridgeport vertical miller with digital read-out

• 1   Supermax vertical miller with digital read-out

• 2   Millport vertical millers with digital read-out

• 2   Excello vertical millers with digital read-out

• 1   Bridgeport with MX3 Proto Trak

• 3   Hardinge HLVH tool room lathes
• 1   Hardinge HLVH tool room lathe w/.00005 dial read-out
• 1   24” Moriseiki engine lathe
• 1   16” Wasino high accuracy engine lathe

     Full complement of precision lathe tool accessories

• 6   Strasbaugh and Robinson-Houchin lapping and polishing machines ~ 18 spindles total
• 2   36” Crane planetary lapping machines
• 1   Dover Diamond Turning Machine ~ 10” travel, turn up to 20” diameter
• 2 A-A high precision index tables with 1/4 ARC second accuracy ~ Sizes 5” & 7”
• 1   Lapmaster Model 24 24” continuous grinder

• 1   Do-All tool and cutter grinder
• 3   Bench tool grinders
• 1   Dunmore precision tool post grinder

• 1   Perkin-Elmer Lambda 950 Spectrometer, wavelength range: 175-3300nm, Includes Standard Transmission Optics and Universal Reflectance Accessory
• 1   Perkin-Elmer Spectrum 100 Optical FT-IR Spectrometer, wavelength range: 1.3-28µm, Includes Pike VeeMas II variable angle (30-85°) specular reflectance accessory and Pike. Fixed angle (10°) specular reflectance accessory
• 1   Nikon Auto collimators with 1/2 ARC second resolution
• 1   Autocollimator ~ 10 min field of view 1/10 second resolution
• 2   TMA optical test benches
• 2   Zygo GPI XP 6” Interferometer
• 1   Zygo GPI XP 4” Interferometer w/ 4” to 6” conversion
• 1   Zygo Non-Contact Profilometer Maxim G.P.  1 Angstrom resolution –   Multiple optical flats and accessories (1/10 wave up to 10” diameter)

In-house chemical Etching facilities & equipment

• 1   Culligan 18 Megaohm-cm DI water filtration system

• 1   MSC horizontal band saw ~ Model 9518879
• 1   MSC vertical band saw ~ Model 9514613
• 1   Do-All horizontal band saw
• 1   Do-All vertical band saw

• 1   Programmable Cincinnati Sub-Zero thermal cycling chamber w/chart recorder( +400º to – 280F) 30” x 30” x 30”
• 1   Lindberg programmable Blue M high temperature box furnace with 4 cubic foot  Capacity with chart recorder (2,000º F temperature)
• 1   Lindberg High Temp Oven ~ 5” H x 7” W x 14” D
• 1   Test Equity programable thermocycling chamber (+350º to -100F) 12” x 12” x 12”

• 2 Zeiss Contura G2 Programmable CMM with Vast xxt head and using Calypso software – Measuring capacity: x = 1000mm, y = 1200mm, z = 600mm
• 1   DuraMax 555 CMM Measuring capacity:  x = 20.0”, y = 20.0”, z = 20.0” with 33” x 37” granite table
• 1   Brown & Sharpe Gage 2000 CMM with 22” x 30” granite table
• 1   Bendix Indiron Comparator with 12” table
• 1   Federal Mechanical Profilometer
• 1   Micro-View MD/1 comparator
• 1   Dia-lectron Gauge
• 1   Western Gage Micro II air gage
• 1   Tesa Micro-Hite 600 24” Height Gauge –Miscellaneous inspection equipment including:      

• Various size calibrated gage blocks
• Granite surface plates
• Multiple sets of micrometers of all types
• Electronic indicators, etc.
• Hole-Matic I.D. Gauges (3-9”, 300-400mm)